PLA Luminy® LX175
36
- Properties:high viscosityFood contact complianceLow flow
- Usages:filmfibre
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt flow rate (melt flow rate) 2 | ISO 1133 | 3.0 g/10 min | |
| ISO 1133 | 8.0 g/10 min | ||
| water content | Karl Fisher | < 400 ppm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 3500 Mpa | |
| Tensile stress | ISO 527-2 | 45.0 Mpa | |
| Tensile strain | ISO 527-2 | < 5.0 % |
| squeeze out | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 85 °C | ||
| drying time | 4.0 到 6.0 hr | ||
| Suggested maximum moisture content | 0.025 % | ||
| Barrel Temperature | 20 到 40 °C | ||
| 170 到 190 °C | |||
| 190 到 210 °C | |||
| die temperature | 190 到 210 °C |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | DSC | 55.0 到 60.0 °C | |
| melting temperature | DSC | 155 °C | |
| Monomer Residue | 内部方法 | < 0.30 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top