Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO1133 | 17 g/10min |
| Melt volume flow rate | | ISO1133 | 15.0 cm3/10min |
| Shrinkage rate | | | 0.30to0.50 % |
| Shrinkage rate | | | 0.30to0.50 % |
| Shrinkage rate | | | 0.14 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 3300 Mpa |
| Tensile stress | | ISO527-2 | 60.0 Mpa |
| Tensile strain | | ISO527-2 | 4.6 % |
| Flexural modulus | | ISO178 | 2800 Mpa |
| Bending stress | | ISO178 | 105 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179 | 70 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Compared to the Leakage Tracking Index (CTI) | | UL746 | PLC 3 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat Deflection Temperature | | ISO75-2/B | 132 °C |
| Heat Deflection Temperature | | ISO75-2/A | 131 °C |
| Linear thermal expansion coefficient | | ISO11359-2 | 5E-05 cm/cm/°C |
| Linear thermal expansion coefficient | | ISO11359-2 | 5.9E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices