ABS Toyolac® 700 RD
174
- Properties:High gloss
- Usages:Electrical appliancesToyMonitor
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | IS062 | 2.0 % | |
| density | IS01183 | 1.16 g/cm |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| proof tracking index | IEC 60112 | 600 3mm/v | |
| Surface Resistivity | IEC 60093 | 1.00E+14 Ω | |
| Linear forming shrinkage rate | IS02577 | 1.0 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength at break | IS0527 | 70 Mpa | |
| elongation at break | IS0527 | 10 % | |
| Yield bending strength | IS0178 | 100 Mpa | |
| Flexural modulus | IS0178 | 3000 Mpa | |
| Charpy Notched Impact Strength | IS0179 | 5.0 kJ/m² | |
| Impact strength of simply supported beam without notch | IS0179 | kJ/m² |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flame retardant performance | UL 94 | ℃ | |
| UL94 | ℃ | ||
| UL94 | ℃ | ||
| UL94 | V-0 ℃ |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature 1.8MPa | IS076 | ℃ | |
| Hot deformation temperature 0.45MPa | IS076 | 230 ℃ | |
| GWFI | IEC 60695-2-11 | ℃ | |
| IEC 60695-2-12 | ℃ | ||
| IEC 60695-2-12 | ℃ | ||
| IEC 60695-2-12 | 960 ℃ | ||
| GWIT | IEC 60695-2-13 | 750 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top