Phenolic

Phenolic Plenco 04548 (Injection) Plastics Engineering Co.

Properties:
Filler mineral filler
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ASTM D256	18.1 J/m
Impact strength of cantilever beam gap		ASTM D256	16 J/m

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	1.5mm	UL 94	V-0
Extreme Oxygen Index		ASTM D2863	27 %

mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D638	54.0 MPa
elongation	Break	ASTM D638	0.80 %
Tensile modulus		ASTM D638	8300 MPa
Bending modulus		ASTM D790	7790 MPa
bending strength		ASTM D790	89.6 MPa
compressive strength		ASTM D695	183 MPa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	156 °C
Continuous use temperature		ASTM D794	202 °C
Linear coefficient of thermal expansion	MD	ASTME831	5.6E-05 cm/cm/°C

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792	1.48 g/cm³
Apparent density		ASTM D1895	0.66 g/cm³
Shrinkage rate	MD	ASTM D955	0.87 %
Water absorption rate	24hr	ASTM D570	0.24 %

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		ASTM D257	2.4E+11 ohms·cm
Dielectric strength		ASTM D149	11 kV/mm
Dielectric constant	1MHz	ASTM D150	5.00
Dissipation factor	1MHz	ASTM D150	0.054
Arc resistance		ASTM D495	157 sec
Compared to the anti leakage trace index	CTI	UL 746	PLC 3

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	E-Sale	ASTM D785	79

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top