Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Plenco 04548 (Injection) Plastics Engineering Co.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04548 (Injection)
Charpy Notched Impact StrengthASTM D25618.1 J/m
Impact strength of cantilever beam gapASTM D25616 J/m
hardnessTest ConditionTest MethodPlastics Engineering Co./Plenco 04548 (Injection)
Rockwell hardnessE计秤ASTM D78579
Mechanical propertiesTest ConditionTest MethodPlastics Engineering Co./Plenco 04548 (Injection)
elongation断裂ASTM D6380.80 %
tensile strength ASTM D63854.0 MPa
compressive strengthASTM D695183 MPa
Tensile modulusASTM D6388300 MPa
Flexural modulusASTM D7907790 MPa
bending strengthASTM D79089.6 MPa
Electrical performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04548 (Injection)
Volume resistivityASTM D2572.4E+11 ohms·cm
dielectric strengthASTM D14911 kV/mm
Dissipation Factor1MHzASTM D1500.054
dielectric constant1MHzASTM D1505.00
Compared to the Leakage Tracking Index (CTI)CTIUL 746PLC 3
arc resistanceASTM D495157 sec
flammabilityTest ConditionTest MethodPlastics Engineering Co./Plenco 04548 (Injection)
UL flame retardant rating1.5mmUL 94V-0
Limiting Oxygen IndexASTM D286327 %
physical property Test ConditionTest MethodPlastics Engineering Co./Plenco 04548 (Injection)
Shrinkage rateMDASTM D9550.87 %
Water absorption rate24hrASTM D5700.24 %
Apparent densityASTM D18950.66 g/cm³
densityASTM D7921.48 g/cm³
Thermal performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04548 (Injection)
Heat distortion temperature1.8MPa,未退火，HDTASTM D648156 °C
Continuous use temperatureASTM D794202 °C
Linear coefficient of thermal expansionMDASTME8315.6E-05 cm/cm/°C

Contact Us

Get App

Top