PA12 Grilamid® LV-3A H
239
- Properties:Low temperature impact regas barrier
- Usages:Electrical applicationschipShell
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.22 g/cm³ | |
| Water absorption rate | ISO 62 | 1.4 % | |
| ISO 62 | 0.6 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | -- kJ/m² | |
| ISO 179/1eA | -- kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | -- kJ/m² | |
| ISO 179/1eU | -- kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 868 | -- | |
| ISO 2039-1 | -- Mpa | ||
| ISO 527-2 | 6500 Mpa | ||
| tensile strength | ISO 527-2 | 120 Mpa | |
| Tensile strain | ISO 527-2 | 6 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | -- ohms | |
| Volume resistivity | IEC 60093 | -- ohms·cm | |
| dielectric strength | IEC 60243-1 | -- KV/mm | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 165 °C | |
| ISO 75-2/C | 90 °C | ||
| Continuous use temperature | ISO 2578 | 90.0 to 120 °C | |
| 内部方法 | 150 °C | ||
| melting temperature | ISO 11357-3 | 180 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top