Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA12 LV-3A H EMS-CHEMIE SWITZERLAND
Grilamid®
Electrical applications,chip,Shell
Low temperature impact re,gas barrier
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-3A H |
|---|---|---|---|
| Continuous use temperature | ---- 22 | ISO 2578 | 90.0 to 120 °C |
| ---- 33 | Internal Method | 150 °C | |
| Hot deformation temperature | 1.8 MPa,Unannealed264 psi, Unannealed | ISO 75-2/A | 165 °C |
| 8.0 MPa,Unannealed1160 psi, Unannealed | ISO 75-2/C | 90 °C | |
| Melting temperature | ISO 11357-3 | 180 °C |
| mechanical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-3A H |
|---|---|---|---|
| Shore hardness | 拉伸模量Tensile Modulus | ISO 527-2 | 6500 Mpa |
| Shore D,15 SecShore D,15 Sec | ISO 868 | -- | |
| 球压硬度Ball Indentation Hardness | ISO 2039-1 | -- Mpa | |
| Tensile strain | BreakBreak | ISO 527-2 | 6 % |
| tensile strength | BreakBreak | ISO 527-2 | 120 Mpa |
| Electrical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-3A H |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | V | |
| Dielectric strength | IEC 60243-1 | -- KV/mm | |
| Surface resistivity | IEC 60093 | -- ohms | |
| Volume resistivity | IEC 60093 | -- ohms·cm |
| Physical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-3A H |
|---|---|---|---|
| density | ISO 1183 | 1.22 g/cm³ | |
| Water absorption rate | Equilibrium,23℃,50% RHEquilibrium, 73°F, 50% RH | ISO 62 | 0.6 % |
| Saturation,23℃Saturation, 73°F | ISO 62 | 1.4 % |
| impact performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/LV-3A H |
|---|---|---|---|
| Charpy Notched Impact Strength | 23℃23°C | ISO 179/1eA | -- kJ/m² |
| -30℃-30°C | ISO 179/1eA | -- kJ/m² | |
| Impact strength of simply supported beam without notch | 23℃23°C | ISO 179/1eU | -- kJ/m² |
| -30℃-30°C | ISO 179/1eU | -- kJ/m² |