Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | ASTMD792A | 1.75 g/cm³ |
Water absorption rate | | ASTM D570 | 0.35 % |
Water absorption rate | | ISO 62 | 0.35 % |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Flexural modulus | | ASTM D790 | 15200 MPa |
Flexural modulus | | ISO 178 | 15000 MPa |
bending strength | | ASTMD790 | 138 MPa |
compressive strength | | ASTMD695 | 169 MPa |
tensile strength | Yield | ASTM D638 | 67.6 MPa |
tensile strength | Yield | ISO 527-2 | 68.0 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ASTM D256A | 120 J/m |
Impact strength of cantilever beam gap | | ISO 180/2A | 12 kJ/m² |
Electrical performance | Test Condition | Test Method | Test Result |
---|
dielectric strength | | ASTM D149 | 130 kV/mm |
dielectric strength | | IEC 60243-1 | 11 kV/mm |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTMD648 | 360 °C |
Linear coefficient of thermal expansion | | ISO 11359-2 | 3.7E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.