Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Phenolic Resinoid 1360HR Resinoid Engineering Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 1360HR |
---|---|---|---|
Impact strength of cantilever beam gap | -- | ISO 180/2A | 12 kJ/m² |
-- | ASTM D256A | 120 J/m |
Mechanical properties | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 1360HR |
---|---|---|---|
compressive strength | ASTMD695 | 169 MPa | |
Flexural modulus | -- | ISO 178 | 15000 MPa |
tensile strength | 屈服 | ASTM D638 | 67.6 MPa |
屈服 | ISO 527-2 | 68.0 MPa | |
bending strength | ASTMD790 | 138 MPa | |
Flexural modulus | -- | ASTM D790 | 15200 MPa |
Electrical performance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 1360HR |
---|---|---|---|
dielectric strength | -- | IEC 60243-1 | 11 kV/mm |
-- | ASTM D149 | 130 kV/mm |
physical property | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 1360HR |
---|---|---|---|
density | ASTMD792A | 1.75 g/cm³ | |
Water absorption rate | 24hr | ASTM D570 | 0.35 % |
23°C,24hr | ISO 62 | 0.35 % |
Thermal performance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 1360HR |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTMD648 | 360 °C |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 3.7E-05 cm/cm/°C |
Contact Us
Get App
Top