Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.20 g/cm³ |
| Melt volume flow rate | | ISO 1133 | 20.0 cm³/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmissivity | | ISO 13468 | 88.0 % |
| Haze ratio | | ISO 13468 | 79 % |
| Haze ratio | | ISO 13468 | 92 % |
| Haze ratio | | ISO 13468 | 92 % |
| transmissivity | | ISO 13468 | 89.5 % |
| transmissivity | | ISO 13468 | 88.7 % |
| transmissivity | | ISO 13468 | 88.5 % |
| Haze ratio | | ISO 13468 | 93 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Burning wire flammability index | | IEC 60695-2-12 | 850 °C |
| Burning wire flammability index | | IEC 60695-2-12 | 850 °C |
| Burning wire flammability index | | IEC 60695-2-12 | 850 °C |
| Burning wire flammability index | | IEC 60695-2-12 | 850 °C |
| FireBehavior,FMVSS | | ISO 37 | passed |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| half-power angle | | | 3.00 ° |
| half-power angle | | | 8.00 ° |
| half-power angle | | | 10.0 ° |
| half-power angle | | | 11.0 ° |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 2400 MPa |
| tensile strength | Yield | ISO 527-2 | 66.0 MPa |
| tensile strength | | ISO 527-2 | 66.0 MPa |
| Tensile strain | Yield | ISO 527-2 | 6.0 % |
| Tensile strain | Break | ISO 527-2 | 70 % |
| Flexural modulus | | ISO 178 | 2450 MPa |
| bending strength | | ISO 178 | 76.0 MPa |
| bending strength | | ISO 178 | 100 MPa |
| FlexuralDeflectionMaxForce | | ISO 178 | 7.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 12 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179/1eA | 12 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179/1eA | 12 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 无断裂 |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 无断裂 |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 无断裂 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ISO 306/B50 | 142 °C |
| Heat distortion temperature | | ISO 75-2/A | 124 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare