PBT+ASA Ultradur® S 4090 G6

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.47 g/cm³
density	density		ISO 1183	1.47 g/cm³
Melt volume flow rate		ISO 1133	20.0 cm³/10min
Shrinkage rate			0.30 %
	Shrinkage rate		ISO 294-4	0.75 %
	Shrinkage rate	Shrinkage rate		ISO 294-4	0.29 %
Water absorption rate	Saturation	ASTM D570	0.40 %
	Water absorption rate		ISO 62	0.40 %
		Water absorption rate		ASTM D570	0.20 %
		Water absorption rate	Water absorption rate		ISO 62	0.20 %
Viscosity value		ISO 1628	105.0 ml/g

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	HB
	UL flame retardant rating		UL 94	HB
	UL flame retardant rating	UL flame retardant rating		UL 94	HB

Mechanical properties	Test Condition	Test Method	Test Result
Tensile strain		ISO 527-2	2.2 %
	Tensile strain		ISO 527-2	3.6 %
		Tensile strain		ISO 527-2	5.9 %
		Tensile strain	Tensile strain		ISO 527-2	4.8 %
Tensile creep modulus		ISO 899-1	7600 MPa
tensile strength		ISO 527-2	79.0 MPa
	tensile strength		ISO 527-2	47.0 MPa
	tensile strength	tensile strength		ISO 527-2	35.0 MPa
elongation		ASTM D638	2.2 %
Tensile strain		ISO 527-2	2.4 %
bending strength		ASTM D790	194 MPa
Tensile modulus		ISO 527-2	9700 MPa
tensile strength		ASTM D638	125 MPa
	tensile strength		ISO 527-2	195 MPa
	tensile strength	tensile strength		ISO 527-2	125 MPa
Tensile creep modulus		ISO 899-1	6700 MPa
Flexural modulus		ASTM D790	8270 MPa
Flexural modulus	Flexural modulus		ISO 178	8300 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179	9.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179	50 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179	59 kJ/m²
Impact strength of cantilever beam gap		ASTM D256	69 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256	85 J/m

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant		IEC 60250	3.80
dielectric constant	dielectric constant		IEC 60250	3.70
Dissipation Factor		IEC 60250	3E-03
Dissipation Factor	Dissipation Factor		IEC 60250	0.018
Compared to the Leakage Tracking Index (CTI)		IEC 60112	PLC 1
Surface Resistivity		ASTM D257	1E+14 ohms
Surface Resistivity	Surface Resistivity		IEC 60093	1E+14 ohms
Volume resistivity		ASTM D257	>1.0E+13 ohms·cm
Volume resistivity	Volume resistivity		IEC 60093	>1.0E+13 ohms·cm

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	210 °C
RTI Elec		UL 746	130 °C
RTI Elec	RTI Elec		UL 746	130 °C
Heat distortion temperature		ISO 75-2/B	210 °C
	Heat distortion temperature		ASTM D648	177 °C
	Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	175 °C
melting temperature		ASTM D3418	223 °C
melting temperature	melting temperature		ISO 3146	223 °C
Linear coefficient of thermal expansion			4E-05 cm/cm/°C
RTI Elec		UL 746	130 °C
RTI Imp		UL 746	90.0 °C
RTI Imp	RTI Imp		UL 746	90.0 °C
RTI Str		UL 746	130 °C
	RTI Str		UL 746	130 °C
	RTI Str	RTI Str		UL 746	130 °C
RTI Imp		UL 746	90.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top