Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.56 g/cm³ |
| Apparent density | | ASTMD1895 | 0.62 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.67 % |
| Water absorption rate | | ASTMD570 | 0.099 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 84 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863 | 34 % |
| UL flame retardant rating | | UL94 | V-1 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| compressive strength | | ASTMD695 | 186 MPa |
| Tensile modulus | | ASTMD638 | 9440 MPa |
| Flexural modulus | | ASTMD790 | 8550 MPa |
| bending strength | | ASTMD790 | 78.0 MPa |
| tensile strength | | ASTMD638 | 49.0 MPa |
| elongation | Break | ASTMD638 | 0.60 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ASTMD256 | 15.8 J/m |
| Impact strength of cantilever beam gap | | ASTMD256 | 14 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | ASTMD150 | 0.057 |
| arc resistance | | ASTMD495 | 166 sec |
| Compared to the Leakage Tracking Index (CTI) | | UL746 | 175 V |
| Volume resistivity | | ASTMD257 | 6.4E+11 ohms·cm |
| dielectric strength | | ASTMD149 | 10 kV/mm |
| dielectric constant | | ASTMD150 | 5.60 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 161 °C |
| Continuous use temperature | | ASTMD794 | 216 °C |
| | ASTME831 | 3.6E-05 cm/cm/°C |
| thermal conductivity | | ASTMC177 | 0.47 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare