plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Plenco 04349 (Injection) Plastics Engineering Co.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodPlastics Engineering Co./Plenco 04349 (Injection)
Rockwell hardnessE-SaleASTM D78584
thermal performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04349 (Injection)
Continuous use temperatureASTM D794216 °C
Hot deformation temperature1.8MPa,UnannealedASTM D648161 °C
Linear coefficient of thermal expansionMDASTME8313.6E-05 cm/cm/°C
thermal conductivity100°CASTMC1770.47 W/m/K
mechanical propertiesTest ConditionTest MethodPlastics Engineering Co./Plenco 04349 (Injection)
Bending modulusASTM D7908550 MPa
bending strengthASTM D79078.0 MPa
compressive strengthASTM D695186 MPa
elongationBreakASTM D6380.60 %
Tensile modulusASTM D6389440 MPa
tensile strengthASTM D63849.0 MPa
Electrical performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04349 (Injection)
Arc resistanceASTM D495166 sec
Compared to the anti leakage trace indexCTIUL 746PLC 3
Dielectric constant1MHzASTM D1505.60
Dielectric strengthASTM D14910 kV/mm
Dissipation factor1MHzASTM D1500.057
Volume resistivityASTM D2576.4E+11 ohms·cm
Physical propertiesTest ConditionTest MethodPlastics Engineering Co./Plenco 04349 (Injection)
Apparent densityASTM D18950.62 g/cm³
densityASTM D7921.56 g/cm³
Shrinkage rateMDASTM D9550.67 %
Water absorption rate24hrASTM D5700.099 %
impact performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 04349 (Injection)
Charpy Notched Impact StrengthASTM D25615.8 J/m
Impact strength of cantilever beam gapASTM D25614 J/m
flammabilityTest ConditionTest MethodPlastics Engineering Co./Plenco 04349 (Injection)
Extreme Oxygen IndexASTM D286334 %
UL flame retardant rating1.5mmUL 94V-1

Contact Us

Get App

Top