PC/PTFE LNP™ LUBRICOMP™ DCL-4032 FR
48
- Properties:Thermal stabilityHigh temperature resistanHydrolysis resistance
- Usages:Automotive componentsElectronic and electrical componentsSports equipment
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTMD955 | 0.20 % | |
| ASTMD955 | 0.70 % | ||
| ISO294-4 | 0.67 % | ||
| ISO294-4 | 0.23 % | ||
| Water absorption rate | ASTMD570 | 0.11 % | |
| ISO62 | 0.18 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ISO527-2 | 71.0 Mpa | |
| elongation | ASTMD638 | 3.1 % | |
| Tensile strain | ISO527-2 | 2.8 % | |
| Flexural modulus | ASTMD790 | 4350 Mpa | |
| ISO178 | 4170 Mpa | ||
| bending strength | ASTMD790 | 124 Mpa | |
| Bending stress | ISO178 | 114 Mpa | |
| Tensile modulus | ASTMD638 | 4350 Mpa | |
| ISO527-2/1 | 4290 Mpa | ||
| tensile strength | ASTMD638 | 73.4 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam gap impact strength 3 | ISO180/1A | 10 kJ/m² | |
| UnnotchedIzodImpactStrength3 | ISO180/1U | 34 kJ/m² | |
| Dart impact equipped with measuring instruments | ASTMD3763 | 11.6 J | |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 4.29 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 141 °C | ||
| Hot deformation temperature 4 | ISO75-2/Af | 140 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top