Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.68 g/cm³ |
| Shrinkage rate | | | 0.40到0.80 % |
| Water absorption rate | | | 0.20 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Hot filament ignition temperature | | | 960 °C |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Burn Resistant | | | PX-0 |
| Trekking Services | | | 508.00 cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | | 145 MPa |
| Tensile strain | Break | | 2.0 % |
| Flexural modulus | | | 9500 MPa |
| Bending stress | | | 205 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | | 40 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | | 1E+15 ohms |
| Volume resistivity | | | 1E+14 ohms·cm |
| dielectric strength | | | 30 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | | 210 °C |
| melting temperature | | | 225 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare