Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT Technother® A-SV30-ODI Poly Plastic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Poly Plastic/Technother® A-SV30-ODI |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 40 kJ/m² |
| Supplementary Information | Test Condition | Test Method | Poly Plastic/Technother® A-SV30-ODI |
|---|---|---|---|
| UL flame retardant rating | PX-0 | ||
| Trekking Services | KIT | 508.00 cm |
| Mechanical properties | Test Condition | Test Method | Poly Plastic/Technother® A-SV30-ODI |
|---|---|---|---|
| Flexural modulus | 23°C | 9500 MPa | |
| Tensile strain | 断裂 | 2.0 % | |
| bending strength | 205 MPa | ||
| tensile strength | 屈服 | 145 MPa |
| Electrical performance | Test Condition | Test Method | Poly Plastic/Technother® A-SV30-ODI |
|---|---|---|---|
| Surface Resistivity | 1E+15 ohms | ||
| dielectric strength | 2.00mm | 30 kV/mm | |
| Volume resistivity | 1E+14 ohms·cm |
| flammability | Test Condition | Test Method | Poly Plastic/Technother® A-SV30-ODI |
|---|---|---|---|
| Hot filament ignition temperature | 960 °C |
| physical property | Test Condition | Test Method | Poly Plastic/Technother® A-SV30-ODI |
|---|---|---|---|
| Shrinkage rate | 0.40to0.80 % | ||
| density | 1.68 g/cm³ | ||
| Water absorption rate | 平衡,23°C,50%RH | 0.20 % |
| Thermal performance | Test Condition | Test Method | Poly Plastic/Technother® A-SV30-ODI |
|---|---|---|---|
| melting temperature | 225 °C | ||
| Heat distortion temperature | 1.8MPa,未退火，HDT | 210 °C |
Contact Us
Get App
Top