TPU-Est/eth DP R 3918 geba Kunststoffcompounds GmbH
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183/A | 1.36 g/cm³ | |
| Shrinkage rate | 0.11 % | ||
| 0.49 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 868 | 67 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 91 kJ/m² | |
| ISO 179/1eU | 140 kJ/m² | ||
| Charpy Notched Impact Strength | ISO 179/1eA | 14 kJ/m² | |
| ISO 179/1eA | 60 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 527-2/200 | 64.0 MPa | |
| Tensile strain | Break | ISO 527-2/200 | 22 % |
| Flexural modulus | ISO 178 | 4690 MPa | |
| ISO 178 | 1790 MPa | ||
| bending strength | ISO 178 | 163 MPa | |
| ISO 178 | 56.0 MPa | ||
| wear resistance | ISO 4649 | 64 mm³ |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306/B50 | 125 °C | |
| Linear coefficient of thermal expansion | DIN 53752 | 7E-06 cm/cm/°C | |
| DIN 53752 | 1.3E-04 cm/cm/°C | ||
| Heat distortion temperature | ISO 75-2/B | 155 °C | |
| ISO 75-2/A | 127 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top