Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPU-Est/eth DP R 3918 geba Kunststoffcompounds GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R 3918 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 60 kJ/m² |
| -30°C | ISO 179/1eA | 14 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 140 kJ/m² |
| -30°C | ISO 179/1eU | 91 kJ/m² |
| hardness | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R 3918 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 67 |
| Mechanical properties | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R 3918 |
|---|---|---|---|
| Flexural modulus | -30°C | ISO 178 | 4690 MPa |
| 23°C | ISO 178 | 1790 MPa | |
| tensile strength | ISO 527-2/200 | 64.0 MPa | |
| wear resistance | ISO 4649 | 64 mm³ | |
| bending strength | -30°C | ISO 178 | 163 MPa |
| Tensile strain | 断裂 | ISO 527-2/200 | 22 % |
| bending strength | 23°C | ISO 178 | 56.0 MPa |
| physical property | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R 3918 |
|---|---|---|---|
| Shrinkage rate | MD | 0.49 % | |
| density | ISO 1183/A | 1.36 g/cm³ | |
| Shrinkage rate | TD | 0.11 % |
| Thermal performance | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R 3918 |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD | DIN 53752 | 1.3E-04 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 155 °C |
| vicat | ISO 306/B50 | 125 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 127 °C |
| Linear coefficient of thermal expansion | MD | DIN 53752 | 7E-06 cm/cm/°C |
Contact Us
Get App
Top