Share
Add to Comparison

PC TRISTAR® PC-10R-(V) PTS USA

Typical Applications:
Electrical and electronic applications communication equipment
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Electrical and electronic applications | communication equipment

Certificates

No Data...

Technical Data Sheet

impact performanceTest ConditionTest MethodTest ResultTest Unit
Impact strength of cantilever beam gap3.17mmASTM D256640J/m
flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating1.5mmUL 94V-2
Burning wire flammability indexIEC 60695-2-12960°C
Hot filament ignition temperatureIEC 60695-2-13775°C
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
tensile strengthYield,3.17mmASTM D63862.1MPa
elongationBreak,3.17mmASTM D638100%
Bending modulus3.17mmASTM D7902210MPa
bending strengthYield,3.17mmASTM D79089.6MPa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature1.8MPa,UnannealedASTM D648127°C
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A137°C
Linear coefficient of thermal expansionMD:-40to95°CASTME8317E-05cm/cm/°C
Linear coefficient of thermal expansionTD:-40to95°CASTME8316.8E-05cm/cm/°C
RTI ElecUL 746125°C
RTI ImpUL 746115°C
RTIUL 746125°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
densityASTM D7921.20g/cm³
melt mass-flow rate300°C/1.2kgASTM D123810g/10min
Water absorption rate23°C,24hrASTM D5700.15%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Hot wire ignition1.5mmUL 746PLC 3
Hot wire ignition3.0mmUL 746PLC 2
Arc resistanceASTM D49560.0to120sec
Arc resistanceASTM D495PLC6
High arc combustion index1.50mmUL 746PLC 0
High arc combustion index3.00mmUL 746PLC 0
Compared to the anti leakage trace indexCTIUL 746PLC 1
Compared to the anti leakage trace indexCTIUL 746PLC 2
High arc combustion index1.5mmUL 746PLC 0
High arc combustion index3.0mmUL 746PLC 1
High voltage arc tracing rateHVTRUL 746PLC 4mm/min
High voltage arc tracing rateHVTRUL 746PLC 3
Hot wire ignition1.50mmUL 746PLC 2sec
Hot wire ignition3.00mmUL 746PLC 1sec
hardnessTest ConditionTest MethodTest ResultTest Unit
Rockwell hardnessR-ScaleASTM D785120
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.