Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTMD955 | 0.30到0.50 % |
| Water absorption rate | | ASTMD570 | <0.20 % |
| other | Test Condition | Test Method | Test Result |
|---|
| | | 增强玻璃纤维 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| Haze | | ASTMD1003 | Translucent |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| IZOD impact strength | | ASTM D256 | 100 J/m |
| IZOD impact strength | | ASTM D256 | 10 Kgf.cm/cm |
| IZOD impact strength | | ASTM D256 | 1.8 ft.ibf/in |
| tensile strength | | ASTM D638 | 74 Mpa |
| tensile strength | | ASTM D638 | 750 Kgf/cm2 |
| tensile strength | | ASTM D638 | 1100 Ibf/in2 |
| elongation | | ASTM D638 | 5.0 % |
| bending strength | | ASTM D790 | 118 Mpa |
| bending strength | | ASTM D790 | 1200 Kgf/cm2 |
| bending strength | | ASTM D790 | 17100 Ibf/in2 |
| Flexural modulus | | ASTM D790 | 3530 Mpa |
| Flexural modulus | | ASTM D790 | 36000 Kgf/cm2 |
| Flexural modulus | | ASTM D790 | 512000 Ibf/in2 |
| elongation at break | | ASTM D638/ISO 527 | 5.0 % |
| tensile strength | | ASTM D638/ISO 527 | 750 kg/cm²(MPa)[Lb/in²] |
| Flexural modulus | | ASTM D790/ISO 178 | 36000 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 120 kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ASTMD638 | 74.0 Mpa |
| elongation | | ASTMD638 | 5.0 % |
| Flexural modulus | | ASTMD790 | 3530 Mpa |
| bending strength | | ASTMD790 | 118 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 1016 Ω.cm |
| Volume resistivity | | ASTM D257/IEC 60093 | 10^16 Ω.cm |
| Volume resistivity | | ASTMD257 | 1E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 20 KV/mm |
| dielectric constant | | ASTMD150 | 3.20 |
| Dissipation Factor | | ASTMD150 | 8E-03 |
| arc resistance | | ASTMD495 | 110 sec |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.27 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTM D648 | 140 °C |
| | ASTM D648 | 284 ℉ |
| heat resistance | | ASTM D257 | V-0 |
| Combustibility (rate) | | UL94 | V-0 |
| | ASTM D648/ISO 75 | 140 ℃（℉） |
| | ASTMD648 | 140 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare