PP Homopolymer WPP PP PRC25TF2HFL-Black Washington Penn Plastic Co. Inc.
0
- Properties:FillerWashingtonPennWashingtonUSAPenn
- Usages:Applications in the automotive fieldautomotive external components
Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
density | ASTM D792 | 1.07 g/cm³ | |
ISO 1183 | 1.07 g/cm³ | ||
melt mass-flow rate | ASTM D1238 | 10 g/10min | |
ISO 1133 | 10 g/10min |
hardness | Test Condition | Test Method | Test Result |
---|---|---|---|
Rockwell hardness | R-Scale | ASTM D785 | 94 |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
Flexural modulus | ASTM D790 | 2600 MPa | |
tensile strength | Yield | ISO 527-2/5 | 29.0 MPa |
Flexural modulus | ISO 178 | 2200 MPa | |
bending strength | ASTM D790 | 48.0 MPa | |
tensile strength | Yield | ASTM D638 | 31.0 MPa |
elongation | Break | ASTM D638 | 20 % |
Tensile strain | Break | ISO 527-2/5 | 10 % |
Impact resistance | Test Condition | Test Method | Test Result |
---|---|---|---|
Impact strength of cantilever beam gap | ISO 180 | 3.5 kJ/m² | |
Charpy Notched Impact Strength | ISO 179 | 3.0 kJ/m² | |
Impact strength of cantilever beam gap | ASTM D256 | 21 J/m | |
ASTM D256 | 32 J/m | ||
ISO 180 | 2.0 kJ/m² | ||
ISO 180 | 2.4 kJ/m² |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Heat distortion temperature | ASTM D648 | 140 °C | |
ISO 75-2/A | 73.0 °C | ||
ISO 75-2/Af | 71.0 °C | ||
ISO 75-2/B | 122 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top