Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.37 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 6.0 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 91 |
| | ASTMD2240 | 52 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863 | 44 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ASTMD638 | 15.9 MPa |
| elongation | Break | ASTMD638 | 300 % |
| Flexural modulus | | ASTMD790 | 345 MPa |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ASTMD470 | 78.8 kN/m |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength | | ASTMD638 | -25 % |
| Change rate of ultimate elongation | | ASTMD638 | -25 % |
| Change rate of ultimate elongation | | ASTMD638 | -25 % |
| Change rate of tensile strength in air | | ASTMD638 | -5.0 % |
| Change rate of ultimate elongation in air | | ASTMD638 | -15 % |
| Change rate of tensile strength | | ASTMD638 | -20 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTMD746 | -33.0 °C |
| Deformation- | | UL1277 | 7.0 % |
| Deformation- | | UL1277 | 14 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare