ABS GB15
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.16 g/cm3 | |
| Shrinkage rate | ASTM D-955 | 0.50 % | |
| Water absorption rate | ASTM D-570 | 0.16 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 34.5 MPa | |
| elongation at yield | ASTM D-638 | 1.8 % | |
| Flexural modulus | ASTM D-790 | 2930 MPa | |
| bending strength | ASTM D-790 | 50.3 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 80.1 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1E+17 Ohm.cm | |
| dielectric strength | ASTM D-149 | 18 Kv/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 82.2 ℃ | |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000041 cm/cm/℃ | |
| UL flame retardant rating | UL 94 | HB | |
| Heat distortion temperature | ASTM D-648 | 93.3 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top