Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS GB15 USA TPC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | USA TPC/GB15 |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1E+17 Ohm.cm | |
| dielectric strength | ASTM D-149 | 18 Kv/mm |
| Mechanical properties | Test Condition | Test Method | USA TPC/GB15 |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D-638 | 34.5 MPa |
| elongation at yield | ASTM D-638 | 1.8 % | |
| bending strength | 屈服 | ASTM D-790 | 50.3 MPa |
| Impact strength of cantilever beam gap | 3.18mm | ASTM D-256 | 80.1 J/m |
| Flexural modulus | ASTM D-790 | 2930 MPa |
| physical property | Test Condition | Test Method | USA TPC/GB15 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.16 % |
| density | ASTM D-792 | 1.16 g/cm3 | |
| Shrinkage rate | Flow(3.18mm) | ASTM D-955 | 0.50 % |
| Thermal performance | Test Condition | Test Method | USA TPC/GB15 |
|---|---|---|---|
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.000041 cm/cm/℃ |
| Heat distortion temperature | 0.45MPa，未退火，HDT | ASTM D-648 | 93.3 ℃ |
| 1.80MPa，未退火，HDT | ASTM D-648 | 82.2 ℃ | |
| UL flame retardant rating | 1.50mm | UL 94 | HB |
Contact Us
Get App
Top