Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO1133 | 0.45 g/10min |
| Resistance to environmental stress cracking | | ASTMD1693B | 630 hr |
| density | | ISO1183 | 0.952 g/cm³ |
| melt mass-flow rate | | ISO1133 | 0.10 g/10min |
| melt mass-flow rate | | ISO1133 | 10 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO868 | 65 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Blow molding temperature | | | 190to220 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ISO178 | 1500 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/A | 28 kJ/m² |
| film | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | ISO527-3 | 27.0 MPa |
| Tensile stress | Break | ISO527-3 | 37.0 MPa |
| elongation | Break | ISO527-3 | 1400 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ISO306/A120 | 128 °C |
| | EN728 | 90 min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare