PA6/66 Ultramid® A3WG6 BK 00546 BASF GERMANY
251
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Apparent density | 0.70 g/cm³ | ||
| Melt volume flow rate | ISO 1133 | 10.0 cm3/10min | |
| Shrinkage rate | ISO 294-4 | 1.2 % | |
| ISO 294-4 | 0.40 % | ||
| Water absorption rate | ISO 62 | 5.6 to 6.3 % | |
| ISO 62 | 1.5 to 1.9 % | ||
| viscosity number | ISO 307 | 160 cm³/g | |
| Mold Shrinkage - Constrained | 0.40 to 0.50 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 9500 Mpa | |
| tensile strength | ISO 527-2 | 185 Mpa | |
| Tensile strain | ISO 527-2 | 3.7 % | |
| Flexural modulus | ISO 178 | 9200 Mpa | |
| bending strength | ISO 178 | 285 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 75 kJ/m² | |
| ISO 179/1eU | 90 kJ/m² |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 80 °C | ||
| drying time | 4.0 hr | ||
| Suggested maximum moisture content | 0.15 % | ||
| Hopper temperature | 80 °C | ||
| Temperature at the rear of the barrel | 290 °C | ||
| Temperature in the middle of the barrel | 290 °C | ||
| Temperature at the front of the material cylinder | 290 °C | ||
| Spray nozzle temperature | 290 °C | ||
| Processing (melt) temperature | 280 to 300 °C | ||
| Temperature | 80 to 90 °C | ||
| Residence Time | < 10.0 min | ||
| screw speed | < 18 m/min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 260 °C | |
| ISO 75-2/A | 245 °C | ||
| melting temperature | ISO 11357-3 | 260 °C | |
| Polymer Abbreviation | PA66-GF30 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top