plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6/66 A3WG6 BK 00546 BASF GERMANY
Ultramid® 
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodBASF GERMANY/A3WG6 BK 00546
Hot deformation temperature0.45 MPa, UnannealedISO 75-2/B260 °C
1.8 MPa, UnannealedISO 75-2/A245 °C
Melting temperatureISO 11357-3260 °C
Polymer AbbreviationPA66-GF30
mechanical propertiesTest ConditionTest MethodBASF GERMANY/A3WG6 BK 00546
Bending modulusISO 1789200 Mpa
bending strengthISO 178285 Mpa
Tensile modulusISO 527-29500 Mpa
Tensile strainBreakISO 527-23.7 %
tensile strengthBreakISO 527-2185 Mpa
Physical propertiesTest ConditionTest MethodBASF GERMANY/A3WG6 BK 00546
Apparent density0.70 g/cm³
Melt Volume Flow Rate (MVR)275°C/5.0 kgISO 113310.0 cm3/10min
Mold Shrinkage - Constrained0.40 to 0.50 %
Shrinkage rate横向FlowISO 294-41.2 %
FlowISO 294-40.40 %
Stickiness96% H2SO4ISO 307160 cm³/g
Water absorption rateSaturation, 23°CISO 625.6 to 6.3 %
Equilibrium, 23°C, 50% RHISO 621.5 to 1.9 %
impact performanceTest ConditionTest MethodBASF GERMANY/A3WG6 BK 00546
Impact strength of simply supported beam without notch-30°CISO 179/1eU75 kJ/m²
23°CISO 179/1eU90 kJ/m²
injectionTest ConditionTest MethodBASF GERMANY/A3WG6 BK 00546
drying temperature80 °C
drying time4.0 hr
Hopper temperature80 °C
Mold temperature80 to 90 °C
Processing (melt) temperature280 to 300 °C
Residence Time< 10.0 min
Screw speed< 18 m/min
Spray nozzle temperature290 °C
Suggested maximum moisture content0.15 %
Temperature at the front of the material cylinder290 °C
Temperature at the rear of the barrel290 °C
Temperature in the middle of the barrel290 °C