PC/PBT P5308
0
- Properties:Glass fiber reinforced by 30%performance characteristicslow gloss
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.22 g/cm3 | |
| Flow shrinkage rate | ASTM D955 | 0.60-0.90 % | |
| Water absorption rate | ASTM D570 | 0.16 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Fracture tensile strength | ASTM D638 | 103 MPa | |
| elongation at yield | ASTM D638 | 3.0 % | |
| Flexural modulus | ASTM D790 | 6890 MPa | |
| bending strength | ASTM D790 | 186 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 96 J/m | |
| Suspended wall beam without notch impact strength | ASTM D256 | 690 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+15 ohm.cm | |
| dielectric strength | ASTM D149 | 29 kV/mm | |
| dielectric constant | ASTM D150 | 3.60 | |
| Dissipation Factor | ASTM D150 | 0.020 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D648 | 210 ℃ | ||
| ASTM D648 | 171 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top