plas
Log In

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PBT P5308 TYNE USA
--
--
Fiberglass reinforced 30%, performance characteristics, low gloss,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodTYNE USA/P5308
Hot deformation temperature1.8MPa,UnannealedASTM D648210
0.45MPa,UnannealedASTM D648171
mechanical propertiesTest ConditionTest MethodTYNE USA/P5308
Bending modulusASTM D7906890 MPa
bending strengthASTM D790186 MPa
elongation at yieldASTM D6383.0 %
Fracture tensile strengthBreakASTM D638103 MPa
Impact strength of cantilever beam gap3.18mmASTM D25696 J/m
Suspended wall beam without notch impact strength3.18mmASTM D256690 J/m
Electrical performanceTest ConditionTest MethodTYNE USA/P5308
Dielectric constant1 MHzASTM D1503.60
Dielectric strength1.57mm,in AirASTM D14929 kV/mm
Dissipation factor1 MHzASTM D1500.020
Volume resistivityASTM D2571E+15 ohm.cm
Physical propertiesTest ConditionTest MethodTYNE USA/P5308
densityASTM D7921.22 g/cm3
Shrinkage rateASTM D9550.60-0.90 %
Water absorption rate24hrASTM D5700.16 %