Epoxy VisiJet® SL HiTemp
0
- Usages:Engineering accessoriesengineering applicationsparts under the hood of automobiles
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.17 g/cm³ | ||
| 1.23 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | 86 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 3390 MPa | |
| tensile strength | ASTM D638 | 66.0 MPa | |
| elongation | Break | ASTM D638 | 6.0 % |
| Flexural modulus | ASTM D790 | 3080 MPa | |
| bending strength | ASTM D790 | 112 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 26 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 130 °C | |
| ASTM D648 | 57.0 °C | ||
| ASTM D648 | 110 °C | ||
| Glass Transition Temperature | DMA | 62.0 °C | |
| DMA | 132 °C | ||
| Heat distortion temperature | ASTM D648 | 65.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top