Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Epoxy VisiJet® SL HiTemp 3D Systems
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | 3D Systems/VisiJet® SL HiTemp |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 26 J/m |
| hardness | Test Condition | Test Method | 3D Systems/VisiJet® SL HiTemp |
|---|---|---|---|
| Shore hardness | 邵氏D | 86 |
| Mechanical properties | Test Condition | Test Method | 3D Systems/VisiJet® SL HiTemp |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 6.0 % |
| tensile strength | ASTM D638 | 66.0 MPa | |
| Tensile modulus | ASTM D638 | 3390 MPa | |
| Flexural modulus | ASTM D790 | 3080 MPa | |
| bending strength | ASTM D790 | 112 MPa |
| physical property | Test Condition | Test Method | 3D Systems/VisiJet® SL HiTemp |
|---|---|---|---|
| density | --2 | 1.17 g/cm³ | |
| --3 | 1.23 g/cm³ |
| Thermal performance | Test Condition | Test Method | 3D Systems/VisiJet® SL HiTemp |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 57.0 °C |
| 0.45MPa,未退火4，HDT | ASTM D648 | 130 °C | |
| 0.45MPa,未退火，HDT | ASTM D648 | 65.0 °C | |
| Glass Transition Temperature | --4 | DMA | 132 °C |
| Heat distortion temperature | 1.8MPa,未退火4，HDT | ASTM D648 | 110 °C |
| Glass Transition Temperature | -- | DMA | 62.0 °C |
Contact Us
Get App
Top