PA6 Aegis® H35ZI
6
- Properties:Low viscosityHigh rigidityhigh strengthwear resistantAntichemicalheat-resisting
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTMD1238 | 23 g/10min | |
| Shrinkage rate | ASTMD955 | 1.3 % | |
| Water absorption rate | ASTMD570 | 1.6 % | |
| ASTMD570 | 9.5 % | ||
| ASTMD570 | 2.7 % | ||
| water content | ASTMD6869 | <0.10 % | |
| Relative viscosity - @ 96% SAV | 2.34 | ||
| ASTMD789 | 33.0到39.0 |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTMD785 | 119 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 2750 Mpa | |
| tensile strength | ASTMD638 | 79.0 Mpa | |
| elongation | ASTMD638 | 4.1 % | |
| ASTMD638 | 75 % | ||
| Flexural modulus | ASTMD790 | 2470 Mpa | |
| bending strength | ASTMD790 | 96.0 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTMD648 | 152 °C | |
| ASTMD648 | 47.0 °C | ||
| ASTMD648 | 222 °C | ||
| ASTME831 | 7.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top