PA6 Nycast Nyloil Cast Nylons Ltd.

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Water absorption rate		ASTM D570	0.50to0.60 %
	Water absorption rate	Saturation	ASTM D570	2.0to2.5 %
	Water absorption rate	Water absorption rate		ASTM D570	110 MPa
density		ASTM D792	1.14to1.15 g/cm³

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R-Scale	ASTM D785	100to115

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	2590to3280 MPa
tensile strength		ASTM D638	65.5to75.8 MPa
elongation	Break	ASTM D638	45to55 %
Flexural modulus		ASTM D790	2590to3280 MPa
bending strength		ASTM D790	96.5to110 MPa
Compression Modulus		ASTM D695	1900to2590 MPa
compressive strength		ASTM D695	82.7to96.5 MPa
shear strength		ASTM D732	55.2to62.1 MPa
coefficient of friction	Itself - Dynamic	ASTM D1894	0.12
Heat distortion temperature		ASTM D621	0.700to0.800 %
Wear factor			4.00

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	75to96 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D1822	69.4to75.7 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
Continuous use temperature		ASTM D794	110 °C
melting temperature			227to238 °C
Heat distortion temperature		ASTM D648	204to221 °C
Heat distortion temperature	Heat distortion temperature		ASTM D648	93.3to204 °C
Linear coefficient of thermal expansion		ASTM D696	9E-05 cm/cm/°C
Usage temperature			166 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top