SPS

SPS XAREC™ S136 IDEMITSU JAPAN

Properties:
Glass fiber reinforcedHigh temperature resistan
Usages:
Electrical applicationsHousehold daily necessities
Compare View Prices

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength	23℃23℃	ISO 179	10 kJ/m²
Impact strength of simply supported beam without notch	23℃23℃	ISO 179	28 kJ/m²
Impact strength of cantilever beam gap	23℃23℃	ISO 180	9 kJ/m²
Suspended wall beam without notch impact strength	23℃23℃	ISO 180	29 kJ/m²

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2	10600 Mpa
tensile strength	BreakBreak	ISO 527-2	115 Mpa
Tensile strain	BreakBreak	ISO 527-2	1.6 %
Bending modulus		ISO 178	10000 Mpa
bending strength		ISO 178	170 Mpa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	1.8 MPa，Unannealed1.8 MPa，Unannealed	ISO 75-2/A	245 °C
Hot deformation temperature	Hot deformation temperature	0.45 MPa，Unannealed	ISO 75-2/B	265 °C
Linear coefficient of thermal expansion	TD：-30~30℃TD：-30 to 30℃	TMA	0.000040 1/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：-30~30℃MD：-30 to 30℃	TMA	0.000020 1/℃
Relative Heat Index (RTI)	电气性能	UL 746	50 °C
	Relative Heat Index (RTI)	强度机械性能	UL 746	50 °C
	Relative Heat Index (RTI)	Relative Heat Index (RTI)	冲击机械性能	UL 746	50 °C

Physical properties	Test Condition	Test Method	Test Result
density		ISO 1183	1.42 g/cm³
Shrinkage rate	TDAcross Flow	Internal Method	0.50 - 0.80 %
Shrinkage rate	Shrinkage rate	MDFlow	Internal Method	0.10 - 0.40 %
Water absorption rate	Equilibrium，23℃，50% RHEquilibrium，23℃，50% RH2	ISO 62	0.02 %

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		IEC 60093	> 1.0E+16 ohms·cm
Dielectric strength		ASTM D149	35 KV/mm
Dielectric constant	1 MHz1 MHz	IEC 60250	3
Dissipation factor	1 MHz1 MHz	IEC 60250	0.002
Arc resistance		ASTM D495	PLC 6
Compared to the anti leakage trace index		IEC 60112	PLC 0

flame retardant performance	Test Condition	Test Method	Test Result
> 1.50 mm> 1.5 mm		UL 94	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

SPS XAREC™ S136 IDEMITSU JAPAN

Technical Data Sheet

You May Like