HDPE Alathon® M4855
13
- Properties:high densityHigh impact resistanceBending resistanceCompressive crack
- Usages:chipIndustrial applicationsConsumer goods sector
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Apparent density | ASTMD1895 | 0.59to0.62 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 5.0 g/10min | |
| SpiralFlow | 内部方法 | 20.3 CM |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD2240 | 72 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTMD790 | 1010 Mpa | |
| ASTMD790 | 954 Mpa | ||
| ASTMD790 | 772 Mpa | ||
| Tensile modulus | ASTMD638 | 807 Mpa | |
| ASTMD638 | 636 Mpa | ||
| tensile strength | ASTMD638 | 24.0 Mpa | |
| ASTMD638 | 24.1 Mpa | ||
| elongation | ASTMD638 | 12 % | |
| ASTMD638 | 1500 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTMD4812 | NoBreak |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 63.9 °C | ||
| brittle temperature | ASTMD746 | <-76.1 °C | |
| vicat | ASTMD1525 | 125 °C | |
| ASTMD3418 | 128 °C | ||
| Crystallization peak temperature | ASTMD3418 | 113 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top