Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

HDPE M4855 LYONDELLBASELL HOLAND
Alathon®
chip、Industrial applications、Consumer goods sector
high density、High impact resistance、Bending resistance、Compressive crack
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | LYONDELLBASELL HOLAND/M4855 |
---|---|---|---|
Suspended wall beam without notch impact strength | -18°C | ASTM D4812 | NoBreak |
hardness | Test Condition | Test Method | LYONDELLBASELL HOLAND/M4855 |
---|---|---|---|
Shore hardness | 邵氏D,注塑 | ASTM D2240 | 72 |
Mechanical properties | Test Condition | Test Method | LYONDELLBASELL HOLAND/M4855 |
---|---|---|---|
Flexural modulus | 1%正割 | ASTM D790 | 954 Mpa |
elongation | 断裂 | ASTM D638 | 1500 % |
Tensile modulus | -- | ASTM D638 | 807 Mpa |
elongation | 屈服 | ASTM D638 | 12 % |
tensile strength | 断裂 | ASTM D638 | 24.1 Mpa |
屈服 | ASTM D638 | 24.0 Mpa | |
Flexural modulus | -- | ASTM D790 | 1010 Mpa |
2%正割 | ASTM D790 | 772 Mpa | |
Tensile modulus | 1%正割 | ASTM D638 | 636 Mpa |
physical property | Test Condition | Test Method | LYONDELLBASELL HOLAND/M4855 |
---|---|---|---|
Apparent density | ASTM D1895 | 0.59to0.62 g/cm³ | |
spiral flow length | 内部方法 | 20.3 CM | |
melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 5.0 g/10min |
Thermal performance | Test Condition | Test Method | LYONDELLBASELL HOLAND/M4855 |
---|---|---|---|
vicat | ASTM D1525 | 125 °C | |
Heat distortion temperature | 0.45MPa,未退火,HDT | ASTM D648 | 63.9 °C |
brittle temperature | ASTM D746 | <-76.1 °C | |
melting temperature | ASTM D3418 | 128 °C | |
Crystallization peak temperature | DSC)12 | ASTM D3418 | 113 °C |
Contact Us
Get App
Top