Technical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| | | 按容量计算的混合比:1.0按重量计算的混合比:1.0 |
| | | 按容量计算的混合比:1.0按重量计算的混合比:1.0 |
| | | 4.0 min |
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.86 g/cm³ |
| Specific volume | | | 0.538 cm³/g |
| Shrinkage rate | | ASTMD2566 | 0.10 % |
| Solid content by volume | | | 100 % |
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| Curing Time | | | 6.0 hr |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 84 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| TemperatureResistance-Dry | | | 93 °C |
| TensileShearAdhesion | | ASTMD1002 | 17.2 MPa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| compressive strength | | ASTMD695 | 42.5 MPa |
| bending strength | | ASTMD790 | 33.6 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTMD150 | 51.0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD696 | 5.6E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare