TPU AVALON® A 60 E 4902 HUNTSMAN SHANGHAI
64
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | 35.0 cm3/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 56 | |
| ASTM D2240 | 15 | ||
| DIN 53505 | 55 | ||
| DIN 53505 | 15 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| wear resistance | DIN 53516 | 43 mm³ | |
| ASTM D395 | 43 mm³ |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| compression set | ASTM D412 | 8 % | |
| DIN 53504 | 8 % | ||
| tensile strength | ASTM D412 | 2.34 Mpa | |
| DIN 53504 | 1.40 Mpa | ||
| compression set | DIN 53517 | 35 % | |
| DIN 53517 | 60 % | ||
| Shore hardness | ASTM D2632 | 60 % | |
| tensile strength | ASTM D412 | 4.07 Mpa | |
| DIN 53504 | 2.40 Mpa | ||
| ASTM D412 | 7.52 Mpa | ||
| DIN 53504 | 10.0 Mpa | ||
| Tensile strain | ASTM D412 | 720 % | |
| DIN 53504 | 900 % | ||
| tear strength | ASTM D624 | 35.9 kN/m | |
| DIN 53515 | 25 kN/m | ||
| compression set | ASTM D395 | 40 % | |
| ASTM D395 | 80 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | 内部方法 | 98.9to130 °C | |
| TMA | 内部方法 | 145 °C | |
| 内部方法 | 110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top