PPO(PPE)+PS+PA NORYL GTX™ GTX989 resin

Usages:
Applications in the automotive field
automotive external components
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTMD792	1.08 g/cm³
melt mass-flow rate		ASTM D1238	16 g/10min
Melt volume flow rate		ISO 1133	19.0 cm³/10min
Shrinkage rate		内部方法	1.2to1.6 %
Water absorption rate		ISO 62	4.2 %
Water absorption rate	Water absorption rate		ISO 62	1.2 %

Mechanical properties	Test Condition	Test Method	Test Result
elongation	Break	ISO 527-2/50	40 %
Flexural modulus		ASTM D790	2450 MPa
Flexural modulus	Flexural modulus		ISO 178	2300 MPa
bending strength		ISO 178	90.0 MPa
bending strength	bending strength		ASTM D790	95.0 MPa
elongation	Yield	ISO 527-2/50	5.0 %
elongation	elongation		ASTM D638	45 %
tensile strength		ASTM D638	60.0 MPa
tensile strength	tensile strength	Break	ISO 527-2/50	55.0 MPa
elongation		ASTM D638	5.0 %
Tensile modulus		ASTM D638	2350 MPa
Tensile modulus	Tensile modulus		ISO 527-2/1	2300 MPa
tensile strength		ASTM D638	65.0 MPa
tensile strength	tensile strength	Yield	ISO 527-2/50	60.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Dart impact		ASTM D3763	60.0 J
Charpy Notched Impact Strength		ISO 179/1eA	15 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO 179/1eA	22 kJ/m²
Impact strength of cantilever beam gap		ASTM D256	180 J/m
	Impact strength of cantilever beam gap		ASTM D256	240 J/m
		Impact strength of cantilever beam gap		ISO 180/1A	15 kJ/m²
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180/1A	22 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		内部方法	1.0E+3到1.0E+4 ohms·cm

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	190 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/Be	190 °C
vicat		ASTMD152510	195 °C
vicat	vicat		ISO 306/B120	200 °C
Linear coefficient of thermal expansion		ASTME831	8.5E-05 cm/cm/°C
	Linear coefficient of thermal expansion		ISO 11359-2	9E-05 cm/cm/°C
		Linear coefficient of thermal expansion		ASTME831	8.5E-05 cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ISO 11359-2	9E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top