POM Iupital™ F20-13 MITSUBISHI THAILAND
36
- Usages:Suitable for general engineering products
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 9 g/10min | |
| ASTM D-955 | 0.02 in/in |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 8.890 psi | |
| Notch impact strength | ASTM D-256 | 1.2 ft-ib/in | |
| elongation | ASTM D-638 | 60 % | |
| No notch impact strength | ASTM D-256 | n/a ft-ib/in | |
| bending strength | ASTM D-790 | 13.000 psi | |
| Flexural modulus | ASTM D-790 | 377.098 psi | |
| Rockwell hardness | ASTM D-785 | 80 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1E+14 ohm-cm | |
| dielectric constant | ASTM D-150 | 3.700 | |
| Surface Resistivity | ASTM D-257 | 1E+16 Ohm | |
| Dissipation Factor | ASTM D-150 | 0.007 | |
| dielectric strength | ASTM D-149 | 483 v/mil |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top