Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM F20-13 MITSUBISHI THAILAND
Iupital™
Suitable for general engineering products
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
mechanical properties | Test Condition | Test Method | MITSUBISHI THAILAND/F20-13 |
---|---|---|---|
Bending modulus | ASTM D-790 | 377.098 psi | |
bending strength | ASTM D-790 | 13.000 psi | |
elongation | Break | ASTM D-638 | 60 % |
Impact strength of cantilever beam gap | ASTM D-256 | 1.2 ft-ib/in | |
Rockwell hardness | ASTM D-785 | 80 | |
Suspended wall beam without notch impact strength | ASTM D-256 | n/a ft-ib/in | |
tensile strength | ASTM D-638 | 8.890 psi |
Electrical performance | Test Condition | Test Method | MITSUBISHI THAILAND/F20-13 |
---|---|---|---|
Dielectric constant | ASTM D-150 | 3.700 | |
Dielectric strength | ASTM D-149 | 483 v/mil | |
Dissipation factor | ASTM D-150 | 0.007 | |
Surface resistivity | ASTM D-257 | 1E+16 Ohm | |
Volume resistivity | ASTM D-257 | 1E+14 ohm-cm |
Physical properties | Test Condition | Test Method | MITSUBISHI THAILAND/F20-13 |
---|---|---|---|
melt mass-flow rate | ASTM D-1238 | 9 g/10min | |
Shrinkage rate | ASTM D-955 | 0.02 in/in |