POM Copolymer Tekuform TF 20 TEKUMA Kunststoff GmbH

Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	DIN 53479	1.49 g/cm³
melt mass-flow rate	DIN 53735	5.0to10 g/10min
Melt volume flow rate	DIN 53735	4.00to8.00 cm³/10min
Shrinkage rate	内部方法	2.0 %
Water absorption rate	DIN 53495	0.14 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		DIN 53457	1800 MPa
tensile strength	Yield	DIN 53455	40.0 MPa
Tensile strain	Break	DIN 53455	10 %
Flexural modulus		DIN 53457	2000 MPa
bending strength		DIN 53452	65.0 MPa
coefficient of friction			0.11
coefficient of friction	coefficient of friction			0.060

Impact resistance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		DIN 53453	25 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		DIN 53482	1E+15 ohms·cm
Surface Resistivity		DIN 53482	1E+15 ohms

Thermal performance	Test Method	Test Result
Heat distortion temperature	DIN 53461	95.0 °C
Continuous use temperature	UL Unspecified	100 °C
vicat	DIN 53460	165 °C
Linear coefficient of thermal expansion	DIN 53752	9.8E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top