Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM Copolymer Tekuform TF 20 TEKUMA Kunststoff GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TEKUMA Kunststoff GmbH/Tekuform TF 20 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | DIN 53453 | 25 kJ/m² |
| Mechanical properties | Test Condition | Test Method | TEKUMA Kunststoff GmbH/Tekuform TF 20 |
|---|---|---|---|
| tensile strength | 屈服 | DIN 53455 | 40.0 MPa |
| bending strength | 7.0%应变 | DIN 53452 | 65.0 MPa |
| coefficient of friction | Static | 0.060 | |
| Tensile strain | 断裂 | DIN 53455 | 10 % |
| Flexural modulus | DIN 53457 | 2000 MPa | |
| Tensile modulus | DIN 53457 | 1800 MPa | |
| coefficient of friction | Dynamic | 0.11 |
| Electrical performance | Test Condition | Test Method | TEKUMA Kunststoff GmbH/Tekuform TF 20 |
|---|---|---|---|
| Surface Resistivity | DIN 53482 | 1E+15 ohms | |
| Volume resistivity | DIN 53482 | 1E+15 ohms·cm |
| physical property | Test Condition | Test Method | TEKUMA Kunststoff GmbH/Tekuform TF 20 |
|---|---|---|---|
| Melt volume flow rate | 190°C/2.16kg | DIN 53735 | 4.00to8.00 cm³/10min |
| density | DIN 53479 | 1.49 g/cm³ | |
| Shrinkage rate | 内部方法 | 2.0 % | |
| melt mass-flow rate | 190°C/2.16kg | DIN 53735 | 5.0to10 g/10min |
| Water absorption rate | 饱和,23°C | DIN 53495 | 0.14 % |
| Thermal performance | Test Condition | Test Method | TEKUMA Kunststoff GmbH/Tekuform TF 20 |
|---|---|---|---|
| Continuous use temperature | UL Unspecified | 100 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | DIN 53461 | 95.0 °C |
| Linear coefficient of thermal expansion | MD | DIN 53752 | 9.8E-05 cm/cm/°C |
| vicat | DIN 53460 | 165 °C |
Contact Us
Get App
Top