PP Copolymer SAXALEN™ PPC344G25
0
- Properties:Fillerglass fiber reinforced material25%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.05 g/cm³ | |
| Melt volume flow rate | ISO1133 | 23.0 cm³/10min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179/1eU | 42 kJ/m² | |
| Impact strength of cantilever beam gap | ISO180/1A | 8.0 kJ/m² | |
| ISO180/1A | 11 kJ/m² | ||
| Notched Izod impact strength | ISO180/1U | 34 kJ/m² | |
| ISO180/1U | 35 kJ/m² | ||
| Charpy Notched Impact Strength | ISO179/1eA | 9.0 kJ/m² | |
| ISO179/1eA | 11 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO179/1eU | 40 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/1 | 4500 MPa | |
| Tensile stress | Break | ISO527-2/5 | 52.0 MPa |
| Tensile strain | Break | ISO527-2/5 | 3.0 % |
| Flexural modulus | ISO178 | 3800 MPa | |
| Bending stress | ISO178 | 84.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | ISO75-2/A | 124 °C | |
| vicat | ISO306/B120 | 114 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top