AS SAN 51
0
- Properties:Good chemical resistance and toughness
- Usages:Automotive Applications
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.08 g/cm | |
| Shrinkage rate | ASTM D-955 | 0.30-0.40 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.08 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 5.5 g/10min | |
| ISO 1133 | 15 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D-638 | 3380 MPa | |
| tensile strength | ASTM D-638 | 75.8 MPa | |
| Flexural modulus | ASTM D-790 | 3590 MPa | |
| ISO 178 | 3900 MPa | ||
| bending strength | ISO 178 | 125 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 24.0 J/m | |
| ISO 180/1A | 2.00 KJ/m | ||
| Suspended wall beam without notch impact strength | ASTM D-256 | 374 J/m | |
| Rockwell hardness | ASTM D-785 | 83 M scale |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-1 | 104 ℃ | |
| ASTM D-648 | 96.1 ℃ | ||
| ASTM D-648 | 104 ℃ | ||
| ISO 75-1 | 102 ℃ | ||
| vicat | ASTM D-1525 | 110 ℃ | |
| ISO 306 | 106 ℃ | ||
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000068 cm/cm℃ | |
| combustibility | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top