Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
AS SAN 51 Ineos ABS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos ABS/SAN 51 |
|---|---|---|---|
| melt mass-flow rate | 220℃,10kg | ISO 1133 | 15 g/10min |
| density | ISO 1183 | 1.08 g/cm | |
| melt mass-flow rate | 230℃,3.8kg | ASTM D-1238 | 5.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Ineos ABS/SAN 51 |
|---|---|---|---|
| tensile strength | 23℃，断裂 | ASTM D-638 | 75.8 MPa |
| Impact strength of cantilever beam gap | 23℃,3.18mm | ASTM D-256 | 24.0 J/m |
| bending strength | 23℃ | ISO 178 | 125 MPa |
| Rockwell hardness | ASTM D-785 | 83 M scale | |
| Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 2.00 KJ/m |
| Flexural modulus | 23℃ | ISO 178 | 3900 MPa |
| Tensile modulus | ASTM D-638 | 3380 MPa | |
| Suspended wall beam without notch impact strength | 23℃,3.18mm | ASTM D-256 | 374 J/m |
| Flexural modulus | 23℃ | ASTM D-790 | 3590 MPa |
| physical property | Test Condition | Test Method | Ineos ABS/SAN 51 |
|---|---|---|---|
| density | ASTM D-792 | 1.08 g/cm | |
| Shrinkage rate | ASTM D-955 | 0.30-0.40 % |
| Thermal performance | Test Condition | Test Method | Ineos ABS/SAN 51 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa，未退火，12.7mm，HDT | ASTM D-648 | 96.1 ℃ |
| vicat | 50℃/h 50N | ISO 306 | 106 ℃ |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000068 cm/cm℃ | |
| Heat distortion temperature | 1.80MPa，退火，12.7mm，HDT | ASTM D-648 | 104 ℃ |
| vicat | Rate B,Loading 1(10N) | ASTM D-1525 | 110 ℃ |
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-1 | 104 ℃ |
| 1.80MPa，HDT | ISO 75-1 | 102 ℃ | |
| combustibility | 1.60mm | UL 94 | HB |
Contact Us
Get App
Top