Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO1133 | 7.5 g/10min |
| Shrinkage rate | | ISO294-4 | 0.60 % |
| density | | ISO1183/A | 0.900 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO868 | 50 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | ISO527-2 | 14.0 MPa |
| Tensile stress | Break | ISO527-2 | 22.0 MPa |
| Tensile strain | Break | ISO527-2 | >800 % |
| Flexural modulus | | ISO178 | 500 MPa |
| Tensile strain | Yield | ISO527-2 | 20 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/1A | 10 kJ/m² |
| Dart impact equipped with measuring instruments | | ASTMD3763 | 23.0 J |
| Dart impact equipped with measuring instruments | | ASTMD3763 | 16.0 J |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ASTMD624 | 122 kN/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 60.0 °C |
| vicat | | ISO306/A50 | 94.0 °C |
| | ISO3146 | 162 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare