PPO(PPE)+PS+PP NORYL™ WCV072 resin
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.03 g/cm³ | |
| ISO1183 | 1.03 g/cm³ | ||
| melt mass-flow rate | ASTMD1238 | 14 g/10min | |
| Melt volume flow rate | ISO1133 | 13.4 cm³/10min | |
| Water absorption rate | ISO62 | 0.12 % | |
| ISO62 | 0.050 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Break | ASTMD638 | 41.5 MPa |
| Tensile stress | Break | ISO527-2/50 | 42.1 MPa |
| elongation | Yield | ASTMD638 | 15 % |
| Tensile strain | Yield | ISO527-2/50 | 11 % |
| elongation | Break | ASTMD638 | 83 % |
| Tensile strain | Break | ISO527-2/50 | 46 % |
| Flexural modulus | ASTMD790 | 1560 MPa | |
| ISO178 | 1750 MPa | ||
| bending strength | ISO178 | 59.3 MPa | |
| ASTMD790 | 53.2 MPa | ||
| Tensile modulus | ASTMD638 | 1710 MPa | |
| ISO527-2/1 | 1760 MPa | ||
| tensile strength | Yield | ASTMD638 | 43.8 MPa |
| Tensile stress | Yield | ISO527-2/50 | 44.6 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179/1eA | 34 kJ/m² | |
| Impact strength of cantilever beam gap | ASTMD256 | 67 J/m | |
| ASTMD256 | 310 J/m | ||
| ISO180/1A | 6.9 kJ/m² | ||
| ISO180/1A | 37 kJ/m² | ||
| Dart impact equipped with measuring instruments | ASTMD3763 | 45.9 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO306/B120 | 117 °C | |
| ASTME831 | 8.5E-05 cm/cm/°C | ||
| ISO11359-2 | 8.4E-05 cm/cm/°C | ||
| ASTME831 | 1.1E-04 cm/cm/°C | ||
| ISO11359-2 | 1.1E-04 cm/cm/°C | ||
| ASTMD648 | 92.0 °C | ||
| ISO75-2/Af | 98.0 °C | ||
| vicat | ASTMD152510 | 114 °C | |
| ISO306/B50 | 114 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top