ABS HF-5

Properties:
Having good chemical resistance
dimensional stability
impact resistance
good processing performance
good toughness
high hardness
high rigidity
high strength
and processability
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D-792	1.05 g/cm
Mold shrinkage rate		ASTM D-955	0.50 %

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D-1238	7.0 g/10min
Water absorption rate		ASTM D-570	0.30 %

Mechanical properties	Test Condition	Test Method	Test Result
IZOD notch impact strength		ASTM D-256	137 J/m
	IZOD notch impact strength		ASTM D-256	98.1 J/m
	IZOD notch impact strength	IZOD notch impact strength		ASTM D-256	68.6 J/m
Rockwell hardness		ASTM D-785	108 R-Scale
Tensile modulus		ASTM D-638	2450 MPa
tensile yield strength		ASTM D-638	40.2 MPa
Flexural modulus		ASTM D-790	2450 MPa
		ASTM D-790	62.8 MPa

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D-648	88.0 ℃
Linear coefficient of thermal expansion	ASTM D-696	0.000085 cm/cm/℃
specific heat	ASTM C-351	1670 J/kg/℃
thermal conductivity	ASTM C-177	0.21 W/m.K
Flame retardancy		UL 94 HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top