PTFE LNP™ LUBRICOMP™ FL4530-NC SABIC INNOVATIVE US
162
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 3.0 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 900 Mpa | |
| tensile strength | ISO 527-2/50 | 20.0 Mpa | |
| ISO 527-2/50 | 12.0 Mpa | ||
| Tensile strain | ISO 527-2/50 | 9.0 % | |
| ISO 527-2/50 | 12 % | ||
| Flexural modulus | ISO 178 | 700 Mpa | |
| bending strength | ISO 178 | 18.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 6.0 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 80 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/Bf | 63.0 °C | |
| ISO 75-2/Af | 47.0 °C | ||
| Linear coefficient of thermal expansion | ISO 11359-2 | 1.4E-04 cm/cm/°C | |
| ISO 11359-2 | 1.2E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top